 |
Dynatech is fully qualified and experienced with Graphite Hot Zone Insulation & Heater design, manufacture and assembly – understanding the unique strengths of this insulation and heater system. Dynatech has pioneered the “Fit & Forget” Graphite Hot Zone design that has stood the reliability with time |
|
Dynatech designs furnaces for use upto 2,400 F (1,320 C) |
|
Entire Hot Zone of Dynatech vacuum furnace is faced with CFC panels which enables minimal, if not, zero maintenance of it’s hot zones, as a standard feature |
|
Dynatech vacuum furnace vessels are designed and manufactured as per ASME Sec VIII Div 1 U Code Stamped |
|
Dynatech provides double walled carbon steel and stainless steel vessels |
|
Dynatech vacuum furnace are equipped with internal heat exchanger and quench fan with motor |
|
Dynatech is fully geared to come up to the demanding leak tightness requirements of the vacuum furnaces for auto-component brazing requirement – it has demonstrated vacuum leak rates of upto 1 micron/ Hour |
|
Dynatech is familiar and has designed vacuum furnaces that meet or exceed specifications like GM DC-9999-1, Ford AMTD-2710, NADCA, AMS2769A, AMS 2759/7 A etc. |
|
Dynatech vacuum furnaces comply with AMS 2750 D Pyrometry |
|
Dynatech has sufficient experience and expertise in design, manufacture and maintenance of high Vacuum requirements of the auto-component brazing needs (order of 10-5 torr or better) |
|
Dynatech vacuum furnaces provide unique features and facilities specially aimed at meeting or exceeding auto-component specific requirements like distortion etc. |
|
Dynatech vacuum furnaces provide Isothermal Quench facility with unique mar quench features |
|
Dynatech vacuum heat treat furnaces provide inert gas pressure quench facility upto 10-bar (a), as a standard feature |
|
Dynatech vacuum furnaces provide partial pressure facility, as a standard feature |
|
Dynatech`s unique quench gas flow adjustability and flexibility (with only pneumatic movements) enables customers to adjust quench gas flow patterns to suit loading density and component geometry |
|
Dynatech`s unique electrical feedthrough design ensures that the feedthorughs do not allow high current arcing at the feedthorughs and thus provide a long lasting feedthrough connection |
|
Dynatech “Fit & Forget” Graphite Hot Zone also provides the lowest steady state heat loss figures of under 5 watts/ sq. inch at 2,200 F (1,200 C) operating temperature and lower values at lower temperatures |
|
All Dynatech vacuum furnaces are provided with PC based SCADA Control System and or with Touch Screen Control System with Remote Access and Trouble Shoot facility |
